C 34E/SR Halo-RF

C 34E/SR Halo-RF
C 34E/SR Halo-RF C 34E/SR Halo-RF

Semi-Rigid Gooseneck Cardioid Microphone fitted with high brightness LED Halo.

  • Response optimised for consistent sound quality.
  • Unobtrusive slimline design.
  • Superior grade components.
  • Engineered in high quality brass.
  • Finished in Satin Black.
  • Semi-Rigid Gooseneck shaft fitted with high brightness LED Halo.
  • Includes Phantom Power Adaptor.

For 'Glossary of Terms' Click Here

Technical
Length 500mm (19.7")
Application Cardioid Condenser Microphone designed for use in conference halls, places of worship, broadcasting and paging systems. High brightness LED halo gives easy visual indication of person talking.
Type Condenser (back electret)
Polar Pattern Cardioid
Frequency Response 50 Hz - 18 KHz
Sensitivity -40dB +/- 3dB at 1 KHz (0dB = 1 V/Pa)
Impedance 200 Ohms
S/N Ratio 64dB (A)
Maximum Sound Pressure Level 125dB 1% THD
Power Requirements 9 - 48 volts phantom power
Termination Male 5 Pin XLR
Supplied Accessories W2 Foam windshield included
Power Supply 12vdC required for LED
Finish Satin Black
Halo power requirements 12Vdc @ 30mA
Dimensions DIA 8mm (0.32")
Architects and engineer specifications The Electret condenser gooseneck microphone has a cardioid polar pattern and slimline profile design. The microphone is constructed from high quality brass construction using 8.5mm semi-rigid shaft. The microphone is fitted with a phantom power adaptor accepting 9 to 48 volts DC and has an impedance of 200 Ohms. The phantom power adaptor also includes filters which will eliminate all GSM frequencies from 800-1200 MHz and is terminated with a male 5 pin XLR. Frequency response 50 Hz - 18 KHz, sensitivity -40dB +/- 3dB @ 1KHz (0dB =1V/Pa), total harmonic distortion (THD) at an operating level of 125dB less than 1%. The microphone head includes an integral concentric Halo illuminated by high brightness LED’s drawing 30mA max at 12 Volts. The LED’s will require a separate 12 Volt DC power source. The finish is low reflective Satin Black Microphone length: 19.7in/500mm Shaft diameter: 8mm